Frames /sing

kvond

Tag Archives: Christiaan

Spinoza’s Lens-Grinding Equipment

 

Door to the Hofwijck Estate where Spinoza likely strode

Door to the Hofwijck Estate where Spinoza likely strode

 

Spinoza Purchases Lens Grinding Laps

With these I may have ended, in truth, but because for me new dishes for glasses being polished may be fashioned, such is the spirit, your council in this matter I would be eager to hear. I do not see what we may profit in ‘turning’ convex-concave glasses…

…A further reason why convex-concave glasses are less satisfactory, apart from the fact that they require twice the labour and expense, is that the rays, being not all directed to one and the same point, never fall perpendicular on the concave surface. – Letter 36, June 1666

This is what Spinoza writes to mathematician and microscopist Johannes Hudde, part of a correspondence that had begun before the end of the previous year, a correspondence which may have had its impetus in another lettered exchange: the on-going discussions on probability and actuary models between Hudde and Christiaan Huygens of that same year. Spinoza was getting to know his neighbor Huygens, and ends up writing to Hudde, someone he may have known since Rijnsburg and Leiden in the early 60’s.

The value of this letter for those investigating any potential lens-grinding practices Spinoza may have had is that here Spinoza cues that he had his metal shapes or laps made for him, at least at this time in the summer of 1666. The context of these remarks is Spinoza’s argument for the superiority of convex-plano lenses, using the same mathematical analysis of refraction that Hudde uses in his brief “Specilla circularia” (1655). Huygens, the previous summer, had personally calculated to a new degree of precision the phenomena of spherical aberration using convex-plano lenses (something Spinoza may have been privy to), and as Huygens has just left for Paris in April, Spinoza asks Hudde for both practical and theoretical optical advice.

I only wish to present to this context information about the kinds of workmen the Huygens brothers used over the years for their own telescopic lens-grinding projects:

View from the Huygens Estate, the Hofwijck

View from the Huygens Estate, the Hofwijck

 

Christiaan Huygens’ Marbler and Chimney-Sweep

There is no doubt that at first their work consisted solely in grinding and polishing the glass. Even the metal shapes, on which the lenses were ground, were obtained from the outside. Their first ones were of iron (in 1656 Caspar Kalthof supplied one of these, [OC1, 380-81]), later they used copper shapes but for many years they did not make any themselves. In 1662 Christiaan still stated quite emphatically that he had never bothered with making shapes, although he did correct and finish them (OC4 53), and in 1666 in Paris he had a copper shape supplied to him (OC6, 87). But by 1668 we hear that Constantijn makes small shapes (for eyepieces) himself, on a lathe (OC6, 209), and it would appear that later he learned to make larger ones as well, for the instructions for making Telescope-lens (written in 1685 by the two brothers together) contains  detailed instructions about this part of the work (OC21, 251).

“Christiaan Huygens and his instrument makers” (1979), J. H. Leopold

And,

It is not entirely clear if the brothers made their own eyepieces around 1660, but they did not do so later on. Occasionally their correspondence contains references to local craftsman who prepared glass or ground eyepieces; the brothers focused on the delicate work of grinding object lenses.

In 1667 and 1668, Constantijn employed Cornelis Langedelf for polishing glass and grinding eyepieces, and in 1683 this same man delivered the tubes for one of Constantijn’s telescopes. From 1682 the brothers preferred the services of Dirk van der Hoeven, who lived nearby in The Hague. At the same time the brothers also did business with a marbler van der Burgh, who supplied them with grinding laps and glass. The relationships the brothers had with these two craftsmen were not identical. In the case of van der Hoeven – he was often simply referred to as Dirk or the chimney-sweeper – it was only his labour was hired. The brothers supplied the materials and tools, including the grinding laps. Van der Burgh, on the other hand, had a workshop of his own, and the Huygens[es] were were not his only clients. Moreover, one might expect this marbler to have been a more skillful grinder than his chimney-sweeping fellow citizen. So, it was probably was not the routine preparatory work that Constantijn asked of van der Burgh in April 1686, when he sent him two pieces of glass to be flattened 15.

“The Lens Production by Christiaan and Constantijn Huygens” (1999), Anne C. van Helden and Rob H. van Gent

What seems evident from both the Helden and Gent account, and the interpretation of Leopold is that it was not uncommon at all to hire-out for the production of the metal laps in which lenses would be ground. It seems clear from Spinoza’s letter 32 to Oldenburg in November of 1665 that the Huygenses were at least in the possession of a lathe that not only could grind lenses, but also laps or pans, for it is regarding this very (semi-automated) turning of the pans that Spinoza had his greatest doubts:

The said Huygens has been a totally occupied man, and so he is, with polishing glass dioptrics; to that end a workshop he has outfitted, and in it he is able to “turn” pans – as is said, it’s certainly polished – what tho’ thusly he will have accomplished I don’t know, nor, to admit a truth, strongly do I desire to know. For me, as is said, experience has taught that with spherical pans, being polished by a free hand is safer and better than any machine. [See: Spinoza’s Comments on Huygens’s Progress .]

Whether anything good came of this Huygens lathe we cannot know. What is significant though in this combination of evidence, is that Spinoza seems to have made use of someone like the marbler Dirk van der Hoeven, at The Hague, just as the Huygens did, but also that Spinoza maintained a priority using the free had to either polish these purchased laps, or to polish lenses in them. That a chimney-sweep and a marbler would both be hired by someone as wealthy as the Huygens family, suggests a rather wide-spread and eclectic economic foundation for the procurement of these services and other related grinding services, something that did not require a specialist.

It is interesting to place Spinoza somewhere between the handyman Chimney-sweep and the savant Christiaan Huygens. Perhaps, if we take a more refined glance back through history, he seems to be between holding the straight-forward lathe experience of marbler-turner van der Hoeven and the specialized knowledge of Christiaan’s brother Constantijn, who spared no expense in carrying out Christiaan’s designs and theories.

As I have mentioned several times on this weblog, the picture is a bit more complicated than that. Christiaan Huygens had to bow to Spinoza’s assertion that the smaller objective lens makes a better microscope, and marveled at the polish that Spinoza was able to achieve in his microscopes, a polish achieved by “by means of the instrument” in a method that Christiaan did not seem to know. The speciality of knowledge did not restrict itself to just microscopes, but to telescope lenses as well. It is reasonable that the Huygenses purchased telescopes, microscopes and lathes from the Spinoza estate upon his death, and there does seem to have been something special about Spinoza’s laps (one’s he likely polished), as Constantijn used one in 1687, ten years after Spinoza’s death:

[I] have ground a glass of 42 feet at one side in the dish of Spinoza’s clear and bright in 1 hour, without once taking it from the dish in order to inspect it, so that I had no scratches on that side ” (Oeuvres completes vol. XI, p. 732, footnote). [cited by Wim Klever]

Spinoza, it would seem, used a man like van der Hoeven, but held at least to some particular degree both theoretical and craft advantages over Christiaan Huygens.

Approaching Huygens

Approaching Huygens

Advertisements

Some Personal Thoughts on a Possible Spinoza Lathe

Some discussion has been going on over at the Practical Machinist forum, where I have sought any views about the real world workings of any of the devices Spinoza may have used at grind lenses. I have come to the thought that it might very well be a rather simple device that Spinoza used, not much differnt than the one Manzini depicts for the start of the 17th century:

In response to my query someone was kind enough to relate some of his own, unique experiences with a machine not unlike the one illustrated. I post them here because they serve to vivify the elementary nature of these technical movements, in the manner of which a 20th century workman and a 17th century philosopher might share an experience of material and design effects.

Joe writes:

When I was in my 20s I worked for a couple of years at the Peerless Optical Co in Providence, Rhode Island, making lenses for glasses. While much of the work was automated to a degree there was still a little corner of the shop where very special lenses were ground. Because I was actually interested in the work, that became my department.

The lenses were ground against iron forms, called “laps” (either convex or concave) using a variety of progressively finer abrasives. The final polish was achieved by gluing a thick disc of felt to the lap and using a much finer polishing media. The lap spun in a bucket-like contraption that worked very much like a potters wheel. The lens was kept in contact with the lap by means of a hinged arm with an adjustable pin. The arm was held in place with the left hand, the pin pushing against the lens, while you added abrasive to the lap with the right hand. To secure the lens without damaging it, a small flat piece of metal with a center hole was “glued” to it using thick green pitch, exactly like the “sealing wax” used before the invention of gummed envelopes. We melted the pitch onto the lens with a bunsen burner. It was removed by chilling the whole piece, at which point the pitch would harden and fall off the glass.
Other than the motor that spun the lap, there isn’t a thing about this whole process that any 17th century mechanic would find surprising. Also, with particularly difficult lenses, I would have to forgo the hinged arm and hold the lens against the lap with my hand.

In our case, a special purpose-built machine re-cut the laps when they wore…I had a beautiful engraved set of brass gauges which I used to check them (by holding the gauge and lap up to a window) and which must have been 100 years old or more when I was using them. I can see where a lathe of some sort would be essential for making the laps, a primative lathe would suffice, but I can’t see it being used to actually make the lens itself.

The machine illustrated in the post above this one is very much like what I am describing. In fact, other than the hand operation it would be instantly recognizable to anyone who was making lenses in the manner I was. I actually made a couple of lenses for an antique telescope on this equipment…they worked perfectly.

In coincidence to this, Rijk-Jan Koppejan sent me a photograph of a reproduction of just this illustrated device, built by his team and part of their exposition on the invention of the telescope, organized around the 400th year Middelburg anniversary. There is to be a symposium of speakers in September, which I just may have to find a way of attending. He says he may be able to take new, more revealing photographs and send them. I will post them as he might.

Joe mentions that the curvature of this grinding “dish” may be too extreme, but that Manzini’s illustrator may not have thought this a significant factor (also, we cannot see the internal curavature of the reproduction). I don’t know enough about the optics of the time to comment.

He mentions as few more interesting details of his memory of lens grinding with such a lathe, in particular the method he had to use to correct the wear on the “laps” (as he calls them) – Spinoza calls them patinas or scutellae, plates or dishes – and thoughts about processes by which a spherical lens is checked for its optical quality:

I suspect that the drawback to using male/female laps against each other is that both pieces will wear. I am guessing that if the lens maker had a set of gages like I used, which are simply used to check the curve, the lap could be spun in any lathe-like machine and the surface selectively filed or ground to return it to true. As I’ve said, I held the lap and the gage up to a window and looked for a streak of light between them…a very accurate way of measuring once you have some practice and know what to look for.

…Another memory just came back…I think that the felt was attached to the lap with fish or hide glue. The lens was checked by holding it up to a light bulb with a single filiment. You held it in such a way that the light from the filiment reflected off the surface. If there were no breaks or nicks in the reflection, the lens was perfectly true. This could also be done by stretching a hair across a window and picking up the shadow. You could never see the imperfections with the naked eye..

…The lens was finished in what we called an “edger” which was nothing more than a lathe-like spindle that gripped the little metal piece glued to the lens and spun it against a grinding wheel. These were not the modern clay-based wheels but slow turning natural stone wheels that ran in water, the grinding wheel turning one way and the lens in the opposite direction. In this way the outer edge was gradually reduced in a manner perfectly concentric with the optical center. Even if the metal attachment was slightly off center on the original lump of glass, this process insured that it would be perfectly concentric when finished. You could only remove the metal piece after this was done and you could not replace it perfectly so it was a once-chance-only affair.

Althought at this point it is only a collective intution that Spinoza did not use a large, spring-pole lathe such as the one shown at the Rijnsburg, there are some facts that lead to me this thought. First is that when Huygens writes of the superior polish of Spinoza’s lenses, he describes them as “little lenses”:

“the Jew of Voorburg finishes his little lenses by means of the instrument and this renders them very excellent” (Complete Works, 6:155).

I do not have the original word from which “instrument” is translated, but at least at this point it strikes me that this is a small device. And these lenses are small. I am unsure if Huygens is talking about telescope lenses or microscope lenses, but there is the implication of very fine work. This also coincides with Spinoza’s own light criticism of Huygens’ very complex machine, in letter 32 to Oldenburg. (See some of my thoughts on this here.) It is of course possible that Spinoza had a spring-pole lathe much like the Rijnsburg and Hevelius lathes, but the contrast between his own approaches and Huygens’s seems more at home with a simpler device. There are other factors that cause me to think that this is so, but for now this is enough to discuss.